WEEDY
deen

Strengthen Roots, Secure Harvest

The WeedyTech coil works where growth begins: at the roots. It supports plants from the ground up, leading to a stronger, healthier harvest.

When used with soil, a yield increase of up to 22% is possible; when used with coco, a yield increase of up to 30% can be achieved. In hydro-/aeroponic systems, yield increases of up to 38% are also possible.

Water with Impact

Thanks to advanced Tesla technology, the WeedyTech coil structures water in a way that allows plants to absorb nutrients optimally.

Perfect for anyone who values every detail of plant care and wants to promote growth in a targeted way.

Our Practical Tip

The WEEDYTECH coil can be used both for structured water treatment and for targeted frequency application on cannabis plants.

By combining both applications, physiological processes in plant growth can be supported, and under ideal conditions, potentially higher yields can be achieved.

Use of the Coil in Cannabis Cultivation

The antenna should be placed near the plant roots.

The most effective field of influence of a coil is circular, with a diameter of approximately 1.5 meters. When using multiple coils, the coverage areas may overlap.

The coil itself is waterproof. However, the power connection is only protected against splashing water, so the coil should not be fully submerged in water!

Watersupply

For optimal plant growth, the water should be "structured" additionally.

For manual watering, simply keep the coil’s antenna submerged in the water at all times. For automatic irrigation, it is recommended to wrap the antenna around the water supply line.

Instructions

  1. Remove the power supply and coil from the packaging.
  2. Connect the coil to the 12V output of the power adapter.
  3. Plug the 220V power adapter into an outlet – the indicator light on the module should turn on.
  4. Place the antenna in a circular shape around the plant root.
    1. BWhen using a grow tent or planting table, place the antenna in a circle in the center.
    2. This activates a field with a radius of approx. 75 cm (≈ 1.8 m²).
  5. The antenna is waterproof up to the connection on the module.
    → However, the module itself is only splash-proof.
    → Make sure the module is not submerged in water.
  6. Structured water has a strong positive effect on plant growth and quality! Therefore, we recommend structuring the water used for irrigation.
    1. For larger grow setups:
      Wrap the antenna spirally around the main water line, or place it directly into the water tank to achieve optimal water structure.
    2. For smaller applications:
      Structure the water directly in a bucket – the antenna should remain permanently submerged.